Calculated-industries 4095-C User Guide Manual de usuario descargar pdf (Pagina 41)

42 — PiPe Trades Pro™

Horizontal to Horizontal

In the next example, the same box dimensions are used except

the exit tting now creates a pipe exit horizontally instead of

vertically. The entry tting angle of 43.44° and pipe length of

39 and 15/16 inches remain the same since the dimensions in

this example are the same (if they were different, steps 1 and 2

on the previous pages could be repeated to calculate them).

However, by re-orienting the box dimensions to show the

Advance on the same plane as the horizontal exit tting

(Diagram 3), the exit tting angle can easily be solved using the

Rolling Offset feature.

0’ -29”

Roll

0’ - 15”

Oﬀset

0’ - 23”

Advance

Unknown

Exit Fitting

Angle

Diagram 3

KEYSTROKE DISPLAY

  0.

3. Calculate the exit tting angle.

1 5   OFST 15 INCH

2    (Advance) RUN 23 INCH

2     (Roll) LNTH 39-15/16 INCH

 FIT° 54.84°

The entry tting angle is still 43.44°. However, the exit tting

angle is calculated to be 54.84°.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 64 65

Sin comentarios

Calculated-industries 4095-C User Guide Manual de usuario Pagina 41