Calculated-industries 4095-C User Guide Manual de usuario descargar pdf (Pagina 12)

User’s GUide — 13

 Denes the Pipe Material. (Steel, Stainless Steel,

Brass, Aluminum, Cast Iron, PVC or Copper).

 Elbow Type – Denes the type of radius (long or

short) and whether a factory or eld cut 45˚ Butt

Weld elbow is being used. Default value is Butt

Weld – Long.

 Enters the nominal Pipe Size and provides data

pertaining to the entered size.

  Pipe Type – Denes the Pipe Type based on Pipe

Material.

  Cutback – Calculates pipe Cutback after Bend

Angle and Offset are entered.

  Rolling Offset (Roll)– Calculates Rolling Offset

pipe length.

  Flow – Enter or calculate volumetric Flow Rate

through a pipe.

  Velocity – Enter or calculate Velocity and convert

between feet per second, feet per minute, and me-

ters per second.

  Pressure – Enter Pressure value. Calculate Pres-

sure loss. Convert between units of pressure.

  Force – Enter or calculate Force and convert be-

tween lbf, newton.

  Area – Enter pipe area for use in Flow, Velocity,

Pressure, and Force calculations. Calculate Area

given values for Flow/Velocity or Force/Pressure.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 64 65

Sin comentarios

Calculated-industries 4095-C User Guide Manual de usuario Pagina 12