Calculated-industries 4095-C User Guide Manual de usuario Pagina 32

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 65
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 31
Users GUide — 33
TO 3-1/4 INCH
GAP 0 INCH
FIT° 39.81°
IARC 3-15/16 INCH
CARC 6-1/4 INCH
OARC 8-9/16 INCH
The cut length for the pipe is 9 and 1/8 inches and bend angle
is 39.81°. Included in the outputs are the arc lengths to be used
to cut your butt weld elbow to the calculated bend angle. These
are inner arc length of 3 and 15/16 inches, center arc length of
6 and 1/4 inches, and outer arc length of 8 and 9/16 inches.
Note: To return the Welder’s Gap to the default 1/8”, press
to reset your calculator back to default values.
Rolling Offset – Known Bend Angle
Find the center-to-center travel for a rolling pipe offset with a 4”
Roll and a 24” Offset using 45° factory-made long radius butt
weld elbows.
ADVANCE
LENGTH
OFFSET
ROLL
BEND
KEYSTROKE DISPLAY
Vista de pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 64 65

Comentarios a estos manuales

Sin comentarios