Calculated-industries 6020 v2.0 Manual de usuario descargar pdf (Pagina 9)

Rolling or Setting a Custom Scale

1) Press [Mode] until “1: CUS” appears

in the scale box display.

2) Press [Subtract/Count] and [Scale]

simultaneously. “

ROLL” will appear in

the main display. If you are setting a

scale, skip to step 4.

3) Roll desired dimension. “

ROLLING“

now appears in the main display.

Note: For greater accuracy, you may want to roll

the known distance several times, then

enter the distance times the number of rolls

(for example, roll a distance 5 times and if

the distance is 3 feet, enter 15 feet).

4) Press [Scale]. The display will show

zeroes and the units of measurement

annunciator will begin flashing (

FT-IN

for Imperial Mode, MM for Metric

Mode).

5) If you do not want to change the

units of measure, skip to step 6. If

you want to change the units of

measure, press [M1+] until you

reach the desired units.

6) Press [Scale] to begin setting the

scale distance. The left-most digit

will begin flashing. Press:

[M1+] to increment this digit

[Subtract/Count] to decrement

[Scale] to advance to next digit

7) Continue to press [Scale] until all

digits are set and the display returns

to zero.

9 – User’s Guide

6020UG-EFS-C 6/27/03 2:19 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Comentarios a estos manuales

Sin comentarios