Calculated Industries DigiRoller Guía de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
Users Guide — 41
Default Settings
The default settings for the DigiRoller
Plus II are:
Feet-Inch Mode
One Meter Wheel
100% Wheel Calibration*
Display Contrast Level 4
Bell On
*On the DigiRoller
Plus II, you can reset the unit by pressing [Set] then
press the [Light] key four times. This will display:
Press [Reset] to clear the display and begin measuring.
Changing the Calibration Percentage
You can change the wheel calibration percentage to be less than or
greater than 100%, to add or subtract a percentage factor to your mea-
surements. To change the calibration percentage:
1. Press the
[Set] then [Light] keys.
2. Press the
[Set]
key to scroll to preference 4, calibration setting.
3.
Use the [M+] and [M-] keys to move the percentage up or down.
Press [Set].
4. Press the [RESET] key to exit.
6425-UG-C 4/4/03 12:44 PM Page 43
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Comentarios a estos manuales

Sin comentarios