Calculated-industries 4065 v3.1 User Guide Manual de usuario descargar pdf (Pagina 23)

SER

’

UIDE

— 15

(Cont’d)

Press Result

12 Stored (Desired) Riser Height (R-HT )

13 Stored (Desired) Tread Width (T-WD )

14 Stored Headroom (HDRM )

15 Stored Floor Thickness (FLOR )

Note: Default values are 7-1/2 Inches for Desired Riser Height

and 10 Inches for Desired Tread Width, 10 Inches for Floor

Thickness, and 6 Feet 8 Inches for Headroom Height.

Note: It is not possible for the calculator to include the nose/over-

hang measurement. Thus, you need to adjust for this measure-

ment per local codes.

*If the inclination angle exceeds the stored riser height and Tread

Width ratio by 10%, the yield symbol will appear, indicating a

steep incline.

ß 7

Store Desired Riser Height (Riser Ht)

— Stores a

value

other than the default desired stair riser height

of 7-1/2 Inches

(e.g., 8 i ß 7 stores an

8-inch desired stair riser height). To recall the stored

setting, press ® 7.

ß 8

Store Floor Thickness/Height (Floor Ht)

— Stores

a value

other than the default desired floor thickness

of 10 Inches

(e.g., 8 i ß 8 stores an 8-inch

desired floor thickness). To recall the stored setting,

press ® 8. This is used, along with stored head-

room height, for calculating the length of the stair-

well opening.

ß 9

Store Desired Tread Width (Tread W)

— Stores a

value

other than the default desired stair Tread

Width of 10 Inches

(e.g., 1 2 i ß 9 stores a

12-inch desired stair Tread Width). To recall the

stored setting, press ® 9.

Ç ß ß

Set Headroom Height

— Sets the desired

ß ß Headroom Height for calculation of the stairwell

opening.

Default is 6 Feet 8 Inches.

Use the + key

to increase and the – key to decrease the stored

headroom height. See Preference Settings instruc-

tions on page 86.

STORED

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 109 110

Comentarios a estos manuales

Sin comentarios

Calculated-industries 4065 v3.1 User Guide Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Calculadoras, organizadores Calculated-industries 4065 v3.1 User Guide